High-Performance Thin-Layer Chromatographic Assay of Metformin in Urine Using Ion-Pair Solid-Phase Extraction: Application for Bioavailability and Bioequivalence Study of New Microbeads Controlled Release Formulation

JPC – Journal of Planar Chromatography – Modern TLC - A sensitive high-performance thin-layer chromatographic (HPTLC) method was developed for the estimation of metformin in human...     

Simultaneous quantitative determination of insulin aspart and insulin degludec in human plasma using simple shoot LC method

Combining short-acting and long-acting insulin analogs was a real challenge that was overcome by NovoNordisk through the co-formulation of insulin aspart and insulin degludec in single-dosage form. The proposed study provides a simple, short, and reliable HPLC method with diode array detection that is developed and validated for the simultaneous determination of insulin aspart and insulin degludec in human plasma. The proposed method achieved good separation between the two analytes utilizing a C8 column at 35°C in a very short run time (6 min), with a simple, low-cost, and reliable extraction method through precipitation of plasma protein. Gradient elution was applied using a mobile phase consisting of 0.1 M sodium sulfate (pH 3.4) and acetonitrile. The method was validated according to EMA Guideline on Bioanalytical Validation. The proposed method had a linear range from 3.0 to 300 μg/mL for insulin aspart and from 3.5 to 300 μg/mL for insulin degludec. The intra- and inter-day precision of insulin aspart were 0.36–3.33% and 1.59–8.84%, respectively, and accuracy was between 10.06 and 3.09% The intra- and inter-day precision of insulin degludec were 0.29–1.93% and 0.89–5.14%, respectively, and accuracy was between −5.29 and 3.91%.     

Mechanochemical synthesis and giant dielectric properties of CaCu3Ti4O12

CaCu₃Ti₄O₁₂ powder has been synthesized by mechanochemical milling (C-m) and solid-state reaction (C-ssr) techniques. C-m powder has a grain size of ~24 nm as determined from X-ray diffraction and FE-SEM measurements. The grain size of C-m ceramics has increased to 20 μm compared to a size of 3 μm for C-ssr ceramics after sintering at 1,050 °C for 10 h. Giant dielectric constant was observed in both ceramics with that of C-m larger than that of C-ssr. Impedance results show that the grain conductivity of C-m is more than two orders of magnitude lower than that of C-ssr, whereas its grain boundary conductivity is larger than that of C-ssr. These results are supported by the EDX results that show Cu-enriched grain boundaries in C-m ceramics.     

Construction and performance characterization of screen printed and carbon paste ion selective electrodes for potentiometric determination of naphazoline hydrochloride in pharmaceutical preparations

This paper describes the development of screen-printed (SPE) and carbon paste (CPE) sensors for the rapid and sensitive quantification of naphazoline hydrochloride (NPZ) in pharmaceutical formulations. This work compares the electroactivity of conventional carbon paste and screen-printed carbon paste electrodes towards potentiometric titration of NPZ. The repeatability and accuracy of measurements performed in the analysis of these pharmaceutical matrices using new screen printed sensors were evaluated. The influence of the electrode composition, conditioning time of the electrode and pH of the test solution, on the electrode performance were investigated. The drug electrode showed Nernstain responses in the concentration range from 1 × 10(-6) to 1 × 10(-2) mol L(-1) with slopes of 57.5 ± 1.3 and 55.9 ± 1.6 mV per decade for SPE and CPE, respectively, and was found to be very precise and usable within the pH range 3-8. These sensors exhibited a fast response time (about 3 s for both SPE and CPE, respectively), a low detection limit (3.5 × 10(-6) and 1.5 × 10(-6) M for SPE and CPE, respectively), a long lifetime (3 and 2 months for SPE and CPE, respectively) and good stability. The selectivity of the electrode toward a large number of inorganic cations, sugars and amino acids was tested. It was applied to potentiometric determination of NPZ in pure state and pharmaceutical preparation under batch conditions. The percentage recovery values for the assay of NPZ in tablets (relative standard deviations ≤0.3% for n = 4) were compared well with those obtained by the official method.     

Facile Route for the Synthesis of Pyridazine Derivatives: Unexpected Pathway to Benzothiazole,Benzimidazole, and Triazole Derivatives

4‐Amino‐5‐arylmethylidene‐3‐phenyl‐pyridazin‐6‐ones 7 have been synthesized and reacted with selected nucleophile reagents such as phenyl hydrazine, semicarbazide, semithiocarbazide, cyanoacetohydrazide, 2‐aminothiophenol, and 2‐phenylenediamine in ethanol triethyl‐amine solution. An unexpected 1‐phenyl‐3‐arylaziridene 10, 3‐aryl‐5‐oxo(thio)‐1,2,4‐triazole 21, 4‐amino‐3‐aryl‐6‐hydroxy‐pridazine 27, 2‐arylbenzothiazole 30a–c, and 2‐arylbenzimidazole 30d–f have been obtained, respectively. Also, 2‐aminothiophenol and 2‐phenylenediamine were reacted with N‐phenylmethylidene‐2‐cyanoacetohydrazide 2, affording the new 1,4‐benzodiazepine derivatives 35.     

Reactions of 2-Cyano-2-nitrosomethylbenzthiazole: One-Pot Synthesis of New Polyfunctional Pyrazine Derivatives

2-Cyano-2-nitrosomethylbenzthiazole reacts with some active methylene and nucleophile derivatives to yield new fused and isolated polyfunctional pyrazine, -[1,2,4]triazine, -[1,4,5]benzoxadiazepin, -[1,4,5]benzothiadiazepine, [1,4,5]benzotriazepine, -triazole and -triazolo[3,2-c]triazine derivatives in one-pot reaction. The structures were based on IR, MS, and 1 H NMR spectra and elemental data.     

Facile Synthesis of Thiophene- and 1,3,4-Thiadiazole-Based Heterocycles

Treatment of 3-cyanoacetylpyrazole derivative 1 with phenyl isothiocyanate in potassium hydroxide at room temperature followed by α-haloketones 4a–d and hydrazonoyl halides 10a–e gave the corresponding pyrazolylthiophene 6a–d and pyrazolyl-1,3,4-thiadiazole 12a–e derivatives, respectively.     

Multifunctional graphene/platinum/Nafion hybrids via ice templating

We report the synthesis of multifunctional hybrids in both films and bulk form, combining electrical and ionic conductivity with porosity and catalytic activity. The hybrids are synthesized by a two-step process: (a) ice templation of an aqueous suspension comprised of Nafion, graphite oxide, and chloroplatinic acid to form a microcellular porous network and (b) mild reduction in hydrazine or monosodium citrate which leads to graphene-supported Pt nanoparticles on a Nafion scaffold.     

Preconcentration of milk proteins using octadecylated monolithic silica microchip

Sample preparation is a bottleneck in systems for chemical analysis and it is a required step in order to remove interference and preconcentrate the target analytes. Much research in recent years has focused on porous monolithic materials since they are highly permeable to liquid flow and show high mass transfer compared with common packed beds. This study has focused on the use of a glass microchip containing an inorganic silica-based monolithic material modified with octadecyl groups for preconcentration of milk proteins from skimmed cows’ milk that vary in molecular weight, hydrophobicity, and abundance. Comparison between the fabricated device and a commercial cartridge for the preconcentration of proteins in skimmed cows’ milk showed the ability of the device to successfully enrich protein mixtures from the sample. The three replicate experiments showed that the RSD of the mass to charge ratio of milk proteins ranged from 0.01 to 0.46%. In addition, it was found that there were no significant differences between the observed and reported masses of the milk proteins and the relative percentage error of the molecular masses ranged between 0.03 and 0.90%. The fact that the small amounts of sample required and short sample preparation time suggest that this new microfluidic device may be a viable alternative to existing procedures for protein extraction from real samples.     

Microwave-assisted synthesis,antimicrobial, antiquorum-sensing and cytotoxic activities of a new series of isatin-β-thiocarbohydrazones

Abstract

New isatin-β-thiocarbohydrazone hybrids 4-17 were designed relied on isatin scaffold to generate various analogs with expected antimicrobial activity. The new hybrids were estimated for antibacterial effectiveness over S. aureus, B. cereus and E. coli, and antifungal efficacy over C. albicans and A. fumigatus. Compound 14 evinced the highest efficacy over A. fumigatus and C. albicans. In addition, 5 and 12 showed eminent efficacy toward A. fumigatus, where compounds 4, 7, 9, 11, 13, 15 and 16 exhibited moderate activity over the same fungus. Moreover, 6 and 9 displayed moderate activity over C. albicans. The new compounds were also estimated for antiquorum-sensing effectiveness against C. violacium, where compound 17 showed interesting activity. In vitro cytotoxicity assay of the new analogs was done over Hela and COS-7 cancer cell lines. All analogs have IC₅₀ values >50?μM toward both cell lines.